This is an old revision of the document!
Got some (generally) hardware to offer, or that you want? Here's a place to potentially list / check for such.
Some rules of the road/guidelines:
offered/wanted | general description/category | make | model | serial number | quantity | contact | notes |
---|---|---|---|---|---|---|---|
wanted | memory DDR3 1333MHZ 8GiB | up to 2 | Michael.Paoli@cal.berkeley.edu | ECC preferred but not required. Help upgrade hardware BALUG & SF-LUG runs on most of the time | |||
wanted | memory DDR2 667 MHz 1GiB ECC | up to 2 | Michael.Paoli@cal.berkeley.edu | Help upgrade hardware BALUG & SF-LUG runs on regularly but not most of the time (essentially anytime my laptop isn't available at home) | |||
offered | Dell Dimension 8400 (+-) | Dell | Dimension 8400 | 5B0CF61 | 1 | Michael.Paoli@cal.berkeley.edu | Dell Dimension 8400 (manuals) missing outer plastic panels, 2 GiB RAM, keyboard, mouse, 2 optical drives, no hard drive (accepts SATA, …), missing power cord |
offered | all-in-one inkjet/scanner/FAX/… | Brother | MFC-210C | U61083H4F319287 | 1 | Michael.Paoli@cal.berkeley.edu | Specifications ... Makes for good scanner with SANE on, e.g. Linux (I used it for such some years ago); printing? - probably needs TLC to unclog + newer ink (cartridges) (of course) - printed fine when I tried it years ago, but not again years later - even with new ink cartridge, lots of media slots, FAX capable, I have archives of relevant materials from Brother web sites, some (bottom) plastic might be due bit of TLC too (wasn't ideally stored) |
offered | Gig unmanaged switch & power supply | D-Link | DGS-1005D | DR1914C001239 | 1 | Michael.Paoli@cal.berkeley.edu | It's dead - but likely not both the power supply and the switch itself |
offered | hard drive 1TB SATA | Seagate | ST31000NSSUN1.0T | 9QJ3NDRE | 1 | Michael.Paoli@cal.berkeley.edu | NOT for important data! 1000204886016 bytes, 1953525168 512 byte blocks/sectors The SMART data is scary (e.g.: ATTRIBUTE_NAME:Seek_Error_Rate FAIL:NOW RAW_VALUE:185787439933046), but regardless - I was able to do badblocks(8) -sw on the entire drive with zero hard errors. Maybe for your RAID-6 experiments, or that extra backup that's not at all critical, or ??? |
offered | hard drive ~80G IDE | IBM | IC35L080AVVA07-0 | A4H2DVLF | 1 | Michael.Paoli@cal.berkeley.edu | 80000000000 bytes (believed good, provided by Aaron Cohen to Michael Paoli - further details pending) |
offered | hard drive ~80G IDE | Seagate | ST380013A | 3JVANS3G | 1 | Michael.Paoli@cal.berkeley.edu | 80026361856 bytes (believed good, provided by Aaron Cohen to Michael Paoli - further details pending) |
offered | hard drive ~80G IDE | seagate | ST380215A | 9QZD5V6B | 1 | Michael.Paoli@cal.berkeley.edu | (believed good, provided by Aaron Cohen to Michael Paoli - further details pending) |
offered | hard drive 13.6GB ATA/IDE | IBM | DPTA-371360 | JHT7P299 | 1 | Michael.Paoli@cal.berkeley.edu | good wiped 2014-03-03 from Bill Honeycutt estate |
offered | 3.5" floppy disks | varies | (many) | Michael.Paoli@cal.berkeley.edu | within reason, if you need some, let me know - I have more than I need - both DD (720 KiB) & HD (1440 KiB) (or varies somewhat depending upon formatting) |